Isspro R82244 Bedienungsanleitung PDF herunterladen

PERFORMAX

Form No. IS158 (Rev. A 03/11/2008)

ISSPRO, INC.



2515 N.E. Riverside Way



Post Office Box 11177



Portland, Oregon 97211-1899

503-288-4488



800-888-8065



Fax: 503-249-2999

REAR AXLE TEMPERATURE GAUGE AND SENSOR

INSTALLATION INSTRUCTIONS

Models: R43511 R52511 R53511 R59511 R68511 R69511 R82511

 Disconnect batteries. Do not reconnect battery power until system is

fully configured to avoid risk of shock or fire.

 Install Electronic Signal Processor (ESP) and ESP harness according to

instructions.

I C O N K E Y

 CAUTION

 Tools may be required

 Shown in picture

 Connect the Temperature Sensor Harness to the ESP Harness as follows:

a. Remove plugs from cavities 6 and 7 of connector C (green) of the ESP.

b. Using a pair of needle nose pliers, pull the orange wedge lock out of connector C.

c. Insert the terminal from the black wire (thermistor ground) into cavity 7 of connector C on the

ESP, pushing until it snaps into connector C.

d. Insert the terminal from the white wire (thermistor signal) into cavity 6 of connector C on the

ESP, pushing it until it snaps in place.

e. Note: Terminals will be close to flush with the top of the connector when fully seated.

f. A firm pull of the wire will confirm whether they are properly seated.

g. Push the orange wedge lock back into position. If any of the wires are not fully seated, the

wedge lock will not insert into position.

h. Reconnect connector C (green) to the ESP.

Figure 1: Connector C top and bottom

view. Shown with plugs and wedge-lock

installed.

Figure 2: Remove plugs and wedge-lock as

shown. Wedge-lock is replaced once wires are

positioned properly.

Find a location where front axle temperature can be measured such as in the drain plug (ISSPRO

makes a replacement ½”-20 drain plug which includes a ⅛” NPTF port, R78899), or drill and tap a

hole.

1 2

PERFORMAX 1

Inhaltsverzeichnis

Seite 1 - PERFORMAX

PERFORMAX Form No. IS158 (Rev. A 03/11/2008) ISSPRO, INC.  2515 N.E. Riverside Way  Post Office Box 11177  Portland, Oregon 97211-1899 503-288-

Seite 2

Form No. IS158 (Rev. A 03/11/2008) ISSPRO, INC.  2515 N.E. Riverside Way  Post Office Box 11177  Portland, Oregon 97211-1899 503-288-4488  800-8

Verwandte Modelle: R59244 | R53244 | R52244 | R43244 |

Kommentare zu diesen Handbüchern

Keine Kommentare

Isspro R82244 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Sensoren Isspro R82244 herunter. ISSPRO R82244 User Manual [it] [cs] [en] [de] [fr] [pl] [es] Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: R59244 | R53244 | R52244 | R43244 |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Isspro R82244